This specification2 relates to possible hazards that may not be recognized readily by the public and that may be encountered in the normal use for which a. ASTM F available in Chinese here: COMPS/htm. – Both F‐07e1 and F‐08 can be included as a. Both F ASTM F (PF) – Designation: F – 08 An American National Standard Standard Consumer Saf.
|Published (Last):||27 August 2014|
|PDF File Size:||2.15 Mb|
|ePub File Size:||12.66 Mb|
|Price:||Free* [*Free Regsitration Required]|
A marble is permanently enclosed if, when tested in accordance with 16 CFR If the circuit protection device automatically resets, continue the stalled motor test until the battery is exhausted. In addition, the total nitrosamines of the sample shall not exceed 20 ppb. The values given in parentheses are for information only. If reprocessed f963-80 are used, they must be re?
ASTM F Published ()
Cords and Elastics in Toys. Determine whether ff963-08 toy continues ast, conform to the relevant requirements of this speci? The dial of the gauge shall be graduated with its? Toys reasonably intended to be assembled by an adult, and not intended to be taken apart by a child, shall be tested only in the assembled state if the shelf package and assembly instructions indicate prominently that the article is to be assembled by an adult.
The loading device used in the test shall be a torque gauge, torque wrench, or other appropriate device having an accuracy of For plastic bags, prepare by cutting the sides, axtm stretching, into two single sheets. Do not disable any mechanical or electrical protective device such as clutches or fuses.
The recommended batteries shall be in place during the drop test for battery-operated toys. Except for the labeling requirements pointing out the functional hazards and age range for which the toy is intended, this specification has no requirements for those aspects of a toy that present an inherent and recognized hazard as aetm of the function of the toy.
The revisions to this section also provided further harmonization between F and the European toy standard, EN If an accessible, circular hole in any rigid material less than asm. After being subjected to the use and abuse tests of 8. Teethers and Teething Toys. Certain Toys with Spherical Ends.
This standard does not purport to address all of the safety concerns, if any, associated with its wstm. Folding Mechanisms and Hinges: Points of nails or fasteners shall not protrude so as to be accessible. Design Guidelines for Bath Toy Projections. The treads may be wood, cement, or metal.
ASTM F – 08 Standard Consumer Safety Specification for Toy Safety
The content of soluble elements in the extract is determined. The average thickness of the ten measurements shall not be less than 0. For example, toys intended for use in the bathtub shall be tested in soapy water, and toys intended for use in the sandbox v963-08 be exposed to sand during testing. Tension Test for Removal of Components. If not separated by that distance, the labeling statements must be surrounded by a satm line. Additionally, the protective tip shall not produce or reveal hazardous points or edges when?
The disk shall be attached to an appropriate atsm scale having an accuracy of Operate the vehicle continuously until the battery is exhausted or until thermal equilibrium is reached.
Exemption for sports balls with wrist or ankle straps longer than 70 cm intended to be kicked or thrown and returned to the user has been added. Different age limits for various requirements will be found in this specification. This procedure shall then be repeated in a f9630-8 direction.
Additional markings located on the toy or in the instructions must indicate the correct battery size and voltage. Historical Version s – view previous versions of standard. The locking device shall engage automatically when the product is placed in the manufacturer’s recommended use position.
New flammability testing procedures for fabrics have been added.
The toy shall be held horizontally in a test-convenient? The protocol used to evaluate the art materials must be? Toys intended to be repeatedly assembled and taken apart shall have the individual pieces and fully assembled articles, as shown on packaging graphics, instructions or other advertising, evaluated separately. For purposes of ensuring compliance with these requirements, fresh alkaline batteries that meet the dimensional requirements of the latest revision of ANSI C If a fuse or protective device operates opens or trips the device must be replaced or reset as many times as necessary to complete the required number of cycles.
For keys covered by this requirement, there shall be no opening in the? Text describing the hazard s and hazard avoidance behavior s shall appear in sans serif lettering and shall be either left aligned or center justi?
When applied perpendicularly to the major axis of the component at a point 2 6 0. The toys and dummy load shall then be tumble dried in an automatic clothes dryer using the warm setting, or air dried, until the load is dried.
A procedure for testing the? Such an example is a sharp point necessary for the function of a needle. Toys intended for use by children under 8 years of age are subject to this requirement before or after use and abuse testing, or both, as speci?
Design Guidelines for Battery Operated Toys. F — 08 state, in part, that no toy including removable, liberated components, or fragments of toys shall be small enough without being compressed to? If thermal equilibrium is not reached, replace the battery with a fully charged battery and continue the test. Cycle minimum 1 s on time and at least 6 cycles per minute a switch in the toy using the maximum continuous current load as determined in the Maximum Temperature Test or in an equivalent simulated motor load circuit including the inrush and inductive characteristics.